以下のコードでマウスの動きには反応するのですがクリックには反応しません。何が間違っているのでしょうか?
#include <usbhid.h>
#include <Mouse.h>
#include <hiduniversal.h>
#include <SPI.h>
#include "hidmouserptparser.h"
#include <Keyboard.h>
static const int8_t ZERO = 127;
static const int8_t MIN_VALUE = -127;
static const int8_t MAX_VALUE = 127;
USB Usb;
//USBHub Hub(&Usb);
HIDUniversal Hid(&Usb);
HIDMouseEvents MouEvents;
HIDMouseReportParser Mou(&MouEvents);
void setup() {
Mouse.begin();
Serial.begin(115200);
//#if !defined(__MIPSEL__)
// while (!Serial); //Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
//#endif
//Serial.println("Start");
if (Usb.Init() == -1)
//Serial.println("OSC did not start.");
delay(200);
if (!Hid.SetReportParser(0, &Mou))
ErrorMessage<uint8_t > (PSTR("SetReportParser"), 1);
}
void loop() {
/* if (Serial.available())
{
String data = Serial.readString();
if (data =="shttt")
{
Mouse.click();
}
if (data =="cheese" )
{
Keyboard.press('o');
delay(50);
Keyboard.release('o');
}
}
*/
Usb.Task();
mouse_task();
}
void mouse_task() {
uint8_t recv[2];
if (polling_data(recv)) {
int8_t moves[2];
if (parse_data(&moves[0], &moves[1], &recv[0], &recv[1])) {
Mouse.move(moves[0], moves[1], 0);
}
}
if (polling_inverso(recv)) {
int8_t moves[2];
if (parse_data(&moves[0], &moves[1], &recv[0], &recv[1])) {
Mouse.move(-moves[0], -moves[1], 0);
}
}
if (polling_shttt(recv)) {
Mouse.click();
}
}
bool polling_data(uint8_t *data) {
if (Serial.available() >= 4) {
byte bytes[4];
for (byte i = 0; i < 4; i++) {
bytes[i] = Serial.read();
}
if ( (bytes[0] == 0x7E) && (bytes[3] == 0x7E)) {
data[0] = bytes[1];
data[1] = bytes[2];
return true;
}
}
return false;
}
bool polling_shttt(uint8_t *data) {
if (Serial.available() >= 4) {
byte bytes[4];
for (byte i = 0; i < 4; i++) {
bytes[i] = Serial.read();
}
if ( (bytes[0] == 0x5E) && (bytes[3] == 0x5E)) {
//data[0] = bytes[1];
//data[1] = bytes[2];
return true;
}
}
return false;
}
bool polling_inverso(uint8_t *data) {
if (Serial.available() >= 4) {
byte bytes[4];
for (byte i = 0; i < 4; i++) {
bytes[i] = Serial.read();
}
if ( (bytes[0] == 0x7B) && (bytes[3] == 0x7B)) {
//data[0] = bytes[1];
//data[1] = bytes[2];
return true;
}
}
return false;
}
bool parse_data(int8_t *mouse_x, int8_t *mouse_y, uint8_t *read_x, uint8_t *read_y) {
if ( (*mouse_x != ZERO) || (*mouse_y != ZERO) ) {
*mouse_x = *read_x - ZERO;
*mouse_y = *read_y - ZERO;
data_correction(mouse_x, mouse_y);
return true;
}
return false;
}
void data_correction(int8_t *mouse_x, int8_t *mouse_y) {
if (*mouse_x <= MIN_VALUE) {
*mouse_x = MIN_VALUE;
}
if (*mouse_x >= MAX_VALUE) {
*mouse_x = MAX_VALUE;
}
if (*mouse_y <= MIN_VALUE) {
*mouse_y = MIN_VALUE;
}
if (*mouse_y >= MAX_VALUE) {
*mouse_y = MAX_VALUE;
}
}
ツイート |